FastenMaster ThruLOK Deck Fastners for Strong Through Bolt Connections

Whether you are a homeowner or a contractor, you demand quality products to complete a project faster, easier and stronger. FastenMaster offers quality materials for a variety of projects, including composite deck screws,  exterior wood screws, engineered wood fasteners, heavy duty wood screws, ledger board fasteners and stainless-steel trim screws.

FastenMaster Thrulok Fastener 24 Pack

FastenMaster Thrulok Fastener 24 Pack

ThruLOK is the newest addition to the FastenMaster LOK Line of structural wood-to-wood fasteners. With a three-part assembly including a ThruLOK fastener featuring the patent-pending Paddle Point™, engineered washer, and LOK-Nut, ThruLOK offers the speed of a LOK Line Product and the strength of through bolt connections.

This new fastener comes in specific lengths that allow contractors to replace their 1⁄2″ carriage and through-bolts in three primary deck applications: 6 1⁄4″ fastener – Single 2x to 4x Decking Posts, 7″ fastener – Notched 6x Carrying Beams, and 8″ fastener – Double 2x to Single 4x Decking Posts. There is no drill bits or wrenched required and installs with an 18 volt cordless drill. Moreover, their galvanized coating meets IRC ACQ corrosion requirement and there is a lifetime performance guarantee.

To install FastenMaster ThruLOK, simply put the ThruLOK-Washer on the ThruLOK screw with the teeth of the washer facing away from the head of the fastener. Using a 1⁄2″ high torque variable speed drill (18V if cordless), drive the ThruLOK until washer and hex head are just above the wood surface (approx 1⁄4″) and point of screw protrudes out other side of connection. Thread the ThruLOK-Nut onto point of fastener and tighten the nut by hand until flush with wood. Finally, tighten screw with drill and repeat to match code-compliant fastening pattern.

Build with confidence and get the job done right with new ThruLOK Fasteners from DIY Home Center.

FastenMaster’s LedgerLok Speeds Deck Assembly

If you’re looking to speed up your deck production, look no further than FastenMaster’s LedgerLok ledger-board screws.

FastenMaster LedgerLok Ledger Board Fasteners

FastenMaster LedgerLok Ledger Board Fasteners: Faster, Easier, Stronger

FastenMaster LedgerLok is designed to quickly and securely attach the deck’s ledger board to the house’s rim joist, with no pre-drilling or impact wrench required. The sharp gimlet point that eliminates pre-drilling allows you to install the fasteners with a single tool: A 14.4-volt cordless drill or better is recommended. The LedgerLok built-in washer head means no dealing with additional washers, and has the added advantage of preventing over-driving of the screw.

The screws, available is in 3 5/8-inch and 5-inch lengths, undergo a proprietary three-step coating process for guaranteed corrosion protection and are ACQ approved. LedgerLok boasts stronger design shear values than 1/2″ lags and super-size threads that grab hard into joists.

The increased production made possible by LedgerLok will enhance your bottom line, and the finished project will please your customers. That’s a definite win-win situation. And to sweeten the deal even further, a free 5/16-inch driver is included in every package.

DIY Home Center is pleased to carry FastenMaster Deck Screws & Fasteners to help you complete your deck projects “Faster, Easier, Stronger”.